Articles
-
EN-ang
- Article Count:
- 1
-
Uncategorized
- Article Count:
- 5
-
Slideshow
- Article Count:
- 3
-
Career
If you are interested in working with our company, please send us a letter of motivation along with a CV to e-mail This email address is being protected from spambots. You need JavaScript enabled to view it. or This email address is being protected from spambots. You need JavaScript enabled to view it.
We are currently looking for employees in these positions:
- Article Count:
- 2
-
PRODUCTS
- Article Count:
- 0
-
Isolants
- Article Count:
- 0
-
Solid
- Article Count:
- 0
-
Sheets
- Article Count:
- 4
-
Rods
- Article Count:
- 3
-
Tubes
- Article Count:
- 3
-
Mica sheets
- Article Count:
- 1
-
Special reinforced materials
- Article Count:
- 2
-
Solder Mask - Solder Pallet
- Article Count:
- 2
-
Profiles
- Article Count:
- 8
-
Flexible
- Article Count:
- 0
-
Woven electrical insulating tapes
It is produced in linen and canvas. Production in widths of 10 - 60 mm and thicknesses from 0.08 to 0.50 mm.In addition to thickness, the most important parameter is the temperature resistance class. This is given by the material used. Insulation ribbons are made of cotton fibers (temperature class B), polyester fibers (temperature class F) and glass fibers (temperature class H). New special basalt and aramid fibers are applied.
Insulating ribbons for electrotechnical and thermal insulation and for composite products.
Distribution by base material:
- Cotton no. B
- Polyester marking DOG
- Glass no. WITH
- Nomexozn. AND
Distribution by custody:
- Woven linen cloth
- Woven cloth binding
- Article Count:
- 3
-
Thermal protection
- Article Count:
- 1
-
Temperature probes
- Article Count:
- 1
-
Types of cases
- Article Count:
- 4
-
Fuses
- Article Count:
- 2
-
Insulating tubes and holes
- Article Count:
- 1
-
Wires for winding
- Article Count:
- 1
-
Engineering plastics
- Article Count:
- 0
-
PE
- Article Count:
- 0
-
PE-UHMW / PE 1000
Ultra-high molecular polyethylen
Polystone® M is an ultra-high molecular weight polyethylene (UHMW-PE / PE 1000) used in places with demands for low friction coefficient and low abrasion. The material stands out for its exceptional sliding properties, extreme wear resistance, high impact strength and high resistance to chemicals.- Article Count:
- 14
-
PE HMW / PE 500
High molecular polyethylen
Polystone® D is a high molecular weight polyethylene (PE-HMW / PE 500) that excels in its good mechanical properties such as scratch resistance and acid resistance. The material is used for a variety of applications, such as in the food or bottling industry or in health technology.
- Article Count:
- 7
-
PE-HD / PE 300
PE-HD, PE 300 - Polyethylen with high density
Polystone® G is high density polyetylen (PE-HD/PE 300). It is very easy machinable and usable material for many applications, also for chemical equipment and production of tanks.
- Article Count:
- 10
-
PE-LD
Polyethylen with low density
Polystone® E is low density polyetylen (PE-LD), suitable mainly for applications, where is requested soft and flexible material.
- Article Count:
- 1
-
PP
Isotactic, highly heat-stable polypropylene
Polystone® P is an isotactic, highly heat-stable polypropylene (PP) available as a homopolymer and a copolymer.
Polystone® P is used in a wide range of industries, such as:
- Chemical engineering and tank construction
- Healthcare
- Operations from high purity requirements - eg semiconductor technologies, etc.
- Article Count:
- 0
-
PP-H
Polystone® P homopolymer materials are extremely strong and resistant to chemicals, corrosion and heat.
Type of product
Pressed plates, extruded plates, round bars, welding wires, square pipes, U profiles, coilsColours
Natur, black, gray, marble gray, light gray, white, special colorsSpecial properties
- High strength
- Very high temperature resistance
- Excellent weldability
- High resistance to chemicals and corrosion
Typical areas of application
- Chemical engineering and tank construction
- Galvanizing technology
- Ventilation and equipment manufacturing
- Laboratory technique
- Article Count:
- 8
-
PP-C
Polystone® P copolymer materials are exceptional for their rigidity at temperatures up to -30 °C, as well as high strength, chemical resistance and corrosion resistance.
Type of product
Pressed plates, extruded plates, round bars, square pipes, U profiles, welding wires, spoolsColours
Natur, black, gray, marble gray, white, special colorsSpecial properties
High strength
High heat resistance
Excellent weldability
High resistance to chemicals and corrosionTypical areas of application
- Chemical engineering and tank construction
- Galvanizing technology
- Ventilation and equipment manufacturing
- Laboratory technique
- Article Count:
- 1
-
PVDF
High-molecular polymerisate
Polystone® PVDF and SUSTAPVDF are vinylidene-fluoride-based polymerisate outstanding for its excellent chemical resistance, excellent machinability and universal applicability.
Because of its special properties Polystone® PVDF and SUSTAPVDF are especially suited for applications in the chemical industry. Its high purity makes it the ideal material for the semiconductor industry.
- Article Count:
- 6
-
PVC-C
Type of product
Pressed sheetsColours
Grey 7037Trovidur® PHT is a post-chlorinated PVC for chemical tank building.
Special properties
- Normal impact strength
- Uniform physical properties
- Continous service temperature up to 90 °C
- High resistance to acids, lyes and salt solutions
- Flame retardant, self-extinguishing after removal of flame
- Easy processing by welding, thermoforming and glueing
Typical areas of application
Chemical engineering and tank building- Article Count:
- 1
-
PVC-U
The Trovidur® product line represents a long tradition of various PVC products for a wide range of applications. These products excel in shape stability, excellent chemical resistance, thermoformability and fire resistance
- Article Count:
- 7
-
PVC-P
Type of product:
Extruded sheetsColours:
NaturTrovidur® W 1014 is a chemically resistant fine PVC material that can be used in a variety of applications.
Special properties:
- Increased chemical resistance
- High wear resistance
- Excellent electrical insulation properties
- Excellent grip
- Weldable and heat-forming
Typical areas of application:
- Seal
- Packaging
- Stamp pads
- Pendulum pads
- Walls resistant to impact in sandblasting systems
- Varnishes
- Article Count:
- 3
-
POM
- Article Count:
- 0
-
POM-H
- Article Count:
- 1
-
POM-C
Semi-crystalic thermoplast
Characteristics:
- High dimensional stability
- Low moisture absorption
- Excellent sliding properties
- High abrasion resistance
- Ideal combination of tensile strength, stiffness and shock toughness
- Good workability
- Good electrical and dielectric behavior
Usage area:
For components with relatively high requirements for dimensional stability and visual appearanceMechanical engineering, automotive, chemical equipment production
E.g. Measuring devices, sliding elements, tools, drives, bearings, pump components, valves and coils, coupling parts, etc.Electrical and electronics industries
E.g. "Bodies" of coils, insulators, relays and transformer cabinetsHealth technology
E.g. Tool handles, adapters- Article Count:
- 9
-
PA
- Article Count:
- 0
-
PA 6
Semi-crystalline thermoplastic
Properties
- High moisture absorption up to 3% in a standard environment. This results in increased impact strength. In thin-walled elements, it results in a reduction in mechanical strength and dimensional stability
- Excellent damping of sound and vibration
- Excellent sliding properties
- High abrasion resistance
- High mechanical strength associated with high impact toughness
- Excellent workability
- Good adhesive properties
- Good weldability
Fields of applications
Usable universally for parts requiring high load; Often used as a substitute for aluminum or bronze.Engineering industry, maritime industry, vehicle design, food industry
E.g. Sliding parts, wheels, cases, chassis, winches, lifting equipment, rope pulleys, conveyor stars, spiral conveyors- Article Count:
- 8
-
PA 66
Semi-crystalline thermoplastic
Properties
- High moisture absorption, up to 2.7% in a standard environment. This results in increased impact strength. In thin-walled elements, it results in a reduction in mechanical strength and dimensional stability
- Excellent sliding properties
- High abrasion resistance
- Extremely high tensile strength and hardness over a wide temperature range
- Excellent workability
- Good adhesive properties
- Good weldability
- Perhaps a long-term high operating temperature
Fields of application
- Components exposed to mechanical pressure at high temperatures
Mechanical engineering, automotive and accessories manufacturing
E.g. Friction bearings, spool bodies, guide and clutch parts, gears and guide rails
- Article Count:
- 4
-
PA 6G
Semi-crystalline thermoplastic
Polymerized polyamide 6Properties
- High moisture absorption, up to 2.7% in a standard environment. This results in increased impact strength. In thin-walled elements, it results in a reduction in mechanical strength and dimensional stability
- Excellent sliding properties
- Extremely high abrasion resistance
- High mechanical strength associated with high impact toughness
- Excellent workability
- Good adhesive properties
- Good weldability
Chemical resistance
Highly resistant to: hydrocarbons, lyes, fats, oils, fuels, ethers, esters and ketones.
Non-resistant to: halogen, mineral acids and some organic acids, oxidizing agents.Fields of application
Usable universally for parts requiring high load; Often used as a substitute for aluminum or bronze. It also allows the production of large-volume parts.Mechanical engineering
E.g. Sliding parts, housings and wheels
Application at sea
E.g. Chassis, winches
Vehicle design
E.g. Sliding parts, lifting equipment, rope pulleys
Food industry
E.g. Sliding parts, conveyor star, spiral conveyors- Article Count:
- 16
-
PA 12
Semi-crystalline thermoplastic
Properties
- Minimum moisture absorption and maximum dimensional stability from all polyamides
- Excellent noise and vibration reduction
- Extremely high impact strength even at low temperatures
- Good workability
- Good adhesive properties
- Good weldability
Fields of application
For maintenance-free components exposed to environmental influences that are subject to good damping and vibration requirements.
Engineering
E.g. Bearings and gears, housings and covers
Vehicle design
E.g. Sealing and damping elements, valves and quick couplings for fuel supply in pump components- Article Count:
- 2
-
PC
Amorphous thermoplastic
Properties
- Good dimensional stability
- Low moisture absorption
- High stiffness and strength
- Excellent impact toughness
- High deformation temperature
- Good formability
- Good electrical insulation properties
Fields of applications
Applications requiring high shape stability.Electrical industry
E.g. Insulation parts, coil bodies, relay components, connectors, all types of lightsInstrument engineering
E.g. Caps, bonnetHealth technology
E.g. Medical consumablesAutomotive
E.g. rear lights- Article Count:
- 1
-
PET
Semi-crystalline thermoplastic
Properties
- Low moisture absorption
- Good sliding properties
- High wear resistance
- High tensile strength and stiffness
- Good workability
- Good dimensional stability
- Low coefficient of thermal expansion
Fields of application
For industrial parts in many industries requiring high strength, eg mechanical engineering, electrical industry, shipbuilding, food or transportation industry
Machinery and equipment factories
E.g. Gears, levers, cranks, wheels, cams, bearings, sliding elements- Article Count:
- 3
-
PBT
Semi-crystalline thermoplastic
Properties:
- Low moisture absorption
- Good sliding properties
- High wear resistance
- High tensile strength and stiffness
- High impact toughness
- Good workability
- Good adhesive properties
- Good weldability
- Good thermal stability against aging
Chemical resistance
Highly resistant to: hydrocarbons, fats, oils, fuels, ethers, esters, ketones, water up to 40 °C, acids (diluted)
Not resistant to: halogens, alkalis, water from approx. 60 °CFields of application
For industrial parts in many industries, for both internal and external use.
Machinery and equipment factories
E.g. Gears, levers, cranks, wheels, cams, bearings, sliding elements- Article Count:
- 1
-
ABS
Amorphous thermoplastic
Properties:
- Low moisture absorption
- Good sound-proofing properties
- High impact toughness even at low temperatures
- Good thermoformability
- Good weldability
- Good adhesive properties
Chemical resistability
- Good resistance to: water, urea, dilute acids, alkalines
- Low resistance to: alcohols, oils, fats
- Zero resistance to: concentrated mineral acids, aromatic hydrocarbons, esters, ethers, ketones
Field of application
Galvanized parts that are subject to high impact.
Manufacture of vehicles
E.g. Car parts, chrome bars, battery packs, radiator panels
Electrical engineering
Caps and controls
Sanitary technology
Valves, fittings, shower heads
Other
E.g. Transport containers, textile bobbins/coils, door and trunk handles, safety helmets- Article Count:
- 1
-
PPE
Amorphous thermoplastic
Properties
- Low moisture absorption
- Low weight
- High stiffness
- High impact resistance i even at low temperatures
- Good dimensional stability
- Good workability
- High dimensional stability even at high temperatures
- Good electrical insulation properties
Field of application
Dimensionally stable, heat-resistant partsAutomotive
E.g. Components for air conditioning systems, hot air diffusers, profiles for wall protectionElektro- und Elektronikindustrie
E.g. "Bodies" of coils, connectors, cable ducts, components and caps for meters, data processing equipment, insulators, circuit breakersChemical industry
E.g. impellers, valves- Article Count:
- 1
-
E-CTFE
Semi-crystalline thermoplastics
Properties:
- Extremely good resistance to weathering
- High "purity" (does not contain plasticizers, lubricants and non-flammable additives)
- High tensile strength and stiffness
- High impact toughness even at low temperatures
- Good thermoformability
- Excellent weldability
- Perhaps a long-term high operating temperature
- Good electrical insulation properties
Chemical resistance:
- Highly resistant to: acids, oxidants, halogens, alcohols, chlorinated solvents, aliphatic hydrocarbons, fuels
- Not resistant to: alkaline solutions, amines (in any case at high temperatures), DMA, DMF, NMP
Usage area:
- Components with excellent chemical resistance, at high temperatures.
- Manufacture of chemical equipment
Electric, semiconductor and food industry
E.g. Seals, valves and pump parts, membranes, covers, containers, pipes and hoses- Article Count:
- 1
-
PEEK
Semi-crystalline thermoplastic
Properties:
- Excellent dimensional stability
- Difficultly burnt and self-extinguishing
- Extremely low smoke density
- Very high resistance to high-energy radiation
- Excellent sliding properties
- Excellent impact toughness
- High wear resistance
- The ideal ratio of stiffness, tensile strength and
- impact toughness
- Good workability
- Good thermoformability
- Good adhesive properties
- Good weldability
- High dimensional stability even at high temperatures
- Extremely high use at continuous high operating temperature
- Low coefficient of linear thermal expansion
- Good electroinsulating properties across a wide range of temperatures
Fields of application
Parts exposed to high temperatures, mechanical loads such as x- and gamma rays.
Electronic, transport, medical and aerospace industries, chemical engineering
E.g. wire and cable insulation, rotor components, friction discs and seals, impact absorbers, components for analytical equipment, components for dialysis equipment, camshafts, valve inserts- Article Count:
- 14
-
PSU
Amorphous transparent thermoplastic with a yellow touch
Properties
- Extremely good dimensional stability
- Low moisture absorption
- Difficultly burnt and self-extinguishing
- Low smokiness
- Very high resistance to high-energy radiation
- Extremely low absorption of radiation in the microwave range
- High tensile strength, stiffness and durability in a wide thermal interface
- Good workability
- Good thermoformability
- Good adhesive properties
- Good weldability
- Perhaps a high long-term operating temperature
- Low coefficient of linear thermal expansion
- Good electrical insulation properties
Usage area
Mechanically, thermally and electrically highly stressed structural elements, partly in case of need for transparency or parts that are often sterilized.
Electrical and electronics industry
E.g. "Bodies" of coils, switches, connectors, components for microwavesHealthcare
E.g. Laboratory equipment, medical instrumentsFood industry
E.g. Components of dairy machines, cams, bottle units- Article Count:
- 1
-
PES
Amorphous transparent thermoplastic with a touch of yellow
Properties:
- Very high dimensional stability
- Difficultly burnt
- Self-extinguishing
- Small smokiness
- Good resistance to high-energy radiation
- Extremely low absorption of radiation in the microwave range
- High tensile strength within a wide range of temperatures
- High impact toughness even at low temperatures
- Good workability
- Good thermoformability
- Good adhesive properties
- Good weldability
- High dimensional stability even at high temperatures
- Very high continuous operating temperature
- Good electro-insulating properties and excellent dielectric behavior
Chemical resistance
- Resistant to: diluted acids, alkaline solutions, gasoline, oils, fats, alcohols, hot water and aqueous solutions
- Not resistant to: polar solvents, esters, ketones, aromatic hydrocarbons and benzene
Usage area
Whenever a high operating temperature and sterilization with hot steam is required.
Electrical and electronics industry
E.g. "Bodies" of coils, switches, connectors, components for microwavesHealth technology
E.g. Laboratory equipment, medical equipmentFood industry
E.g. Components of dairy machines, cams, bottle units- Article Count:
- 1
-
PPSU
Amorphous transparent thermoplastic with a touch of yellow
Properties:
- Exceptionally low smoke emission in case of ignition
- Highly resistant to x and gamma rays
- High rigidity, tensile strength and hardness across a wide range of temperatures
- High impact toughness even at low temperatures
- Extremely high dimensional stability
- Good workability
- Good thermoformability
- Good adhesive properties
- Good weldability
- Good dimensional stability at high temperatures
- Very high continuous operating temperature
- Good electro-insulating properties and good dielectric behavior
Chemical resistance
- Highly resistant to: hot water and steam
- Good resistance to: dilute acids, alkaline solutions, gasoline, oils, fats, alcohols
- Limited resistance to: polar solvents, aromatic hydrocarbons, benzene
Usage area
For parts sterilized by exposure to gamma rays, hot steam, ethylene oxide and hot air.
Healthcare
E.g. Laboratory equipment, medical equipment- Article Count:
- 2
-
PEI
Amorphous transparent thermoplastic with a touch of yellow
Properties:
- Extremely high fire resistance
- Very low smoke emission in case of ignition
- High rigidity, tensile strength and hardness across a wide range of temperatures
- Good workability
- Good thermoformability
- Good adhesive properties
- Good weldability
- Low coefficient of thermal expansion
- Large dimensional stability even at high temperatures
- Very high continuous operating temperatureHigh electrical / dielectric strength
- Virtually invariant in a wide range of temperatures and electrical frequencies
Usage area
Parts that must meet the special requirements for fire-resistant properties and mechanical strength.
Electrical and electronics industry
E.g. High voltage circuit breakers, microwave components, connectors, terminal blocksHealthcare
E.g. Tool handles, adaptersAircraft design
E.g. Front panels in passenger cabins- Article Count:
- 2
-
PPS
Semi-crystalline thermoplastic
Properties
- Difficultly burnt
- Self-extinguishing
- Good workability
- Good adhesive properties
- Extremely high long-term operating temperature
- High dimensional stability even at high temperatures, partly in the case of a glass fiber reinforced version
- Good electrical insulation properties
Usage area:
Dimensional stable parts for applications involving high operating temperatures and requiring good chemical resistance.Construction of means of transport:
E.g. Engine parts, fuel injection systems, carburetor and pump componentsElectrical and Electronic Engineering:
E.g. Insulation parts, carbon holders, plug-in connectors, chips, sockets, coils, circuitsDevice design:
E.g. Parts of water meters, pump components, sealing elements, valves with special chemical requirementsHealthcare:
E.g. Sterilization equipment- Article Count:
- 2
-
Food contact
- Article Count:
- 2
-
LubX
- Article Count:
- 4
-
Glass fabric, mats and yarns
- Article Count:
- 0
-
Glass yarn
- Article Count:
- 1
-
Materials for the production of composites Freudenberg
- Article Count:
- 1
-
Glass mats and fabrics for the manufacture of bituminous membranes
- Article Count:
- 1
-
Thermally insulating panel Glastherm
High-strength, temperature resistant insulation made from glass fibre reinforced composite materials play a very important role in accurate temperature controls and energy conservation. They are employed wherever thermal separation is required for operational and/or economic reasonsbetween components in installations.
THESE ALL OFFER THE FOLLOWING SPECIAL CHARACTERISTICS:
- high strength characteristics ensure against bending and compression. Continuous longterm use
- low thermal conductivity
- outstanding size and dimensional stability
- excellent workability, available in a wide range
- oil and monture resistant
- insulation with excelent dielectric characteristics
WE CAN OFFER FOLLOWING:
- we have on stock GLASTHERM HT200 – which is most often used in thicknesses 5, 6, 8, 10, 12, 15, 20, 25 mm, sheet size 1220x2440 mm
- GLASTHERM HT220 - thicknesses 6, 8, 10, 15, 20, 25 mm, sheet size 1220x2440 mm
- GLASTHERM HT250 - thicknesses 6, 8, 10, 12, 15, 20 mm, sheet size 1040x2000 mm
- GLASTHERM THERMALITE 500, is produced in thicknesses 4 – 50 mm, sheet size 1000x1200 mm
- Different sizes, types and material delivery dates are specified after consultation with manufacturer
- We mainly supply precision-machined parts and cutoff s according to drawings
- Our company has technological device to which we are able to work with maximum format 1220 x 2440 mm
We will prepare price offer base on customer specific requirements
Material application:
- Injection forms insulation sheets, presses, and machine equipment insulation
Comment:
- The materials are parts subject to wear. The lifetime depends on the height and stability of the temperature, mechanical stress, and the type of disconnection that is being used
- Other thicknesses on request
- Article Count:
- 5
-
Ballistic protection
- Article Count:
- 1
-
Flexible insulation, adhesive tapes
Flexible insulating materials are used in electronic and electrical applications for electrical and mechanical protection.
Flat insulation is available in temperature classes A - 105 ° C, B - 130 ° C, F -155 ° C, H - 180 ° C. We supply materials in standard widths: 450 - 914 (990) mm or we divide them according to the customer into the required width.
Flexible insulation can be feathered, shaped, pressed or punched.
We supply DuPont materials: Mylar®, NPN, Kapton®, Nomex®.
We cooperate with COVEME company, which is a manufacturer of flexible insulation DyFlex®, DyTerm®, DyTerm® K, DyBond®, DyFilm®, DyFilm®HB / HBB, DyVolt® for electric motors, generators, transformers, photovoltaics, etc.www.coveme.com
Catalog for downloading
Other types of flat insulation include Prespan and electrical cardboard in sheets.- Article Count:
- 0
-
Flexible insulating materials
- Article Count:
- 0
-
NOMEX®, KAPTON®, MYLAR®, PRESSPAHN
- Article Count:
- 4
-
Shaping of slot insulation
- Article Count:
- 1
-
Pressing and shaping of insulations
- Article Count:
- 1
-
Cutting non-stick materials
- Article Count:
- 1
-
Feathering
- Article Count:
- 1
-
Glass banding tape
- Article Count:
- 1
-
Electrical insulating adhesive tapes
- Article Count:
- 1
-
News
- Article Count:
- 9
-
Production
- Article Count:
- 0
-
Machining
Cutting of electrical insulating materials and plastics, is combined with their precision machining. The company is equipped with CNC machines, milling and turning machining centers that enable multiple processing and both machining electrical insulation boards, plastics, composites, metals and machining of models and molds.
Following machining is possible:
• Milling - models and molds with dimensions up to 1200x2400x650 mm.
• Turning - up to 320 mm and lengths up to 1500 mm and 500 mm diameter flangeTo ensure a truly precise production, the company is also equipped with 3D measurement system and a wide range of complementary instruments. Each product undergoes final finishing - if electroinsulants – and if necessary then also coating the cutting edges and surfaces.
We are equipped with modern high speed CNC machines, guaranteeing achieve high dimensional and geometric accuracy required surface quality. Beyond the the three-axis vertical milling CNC machines with an additional fourth axis has our fleet of two-inch horizontal CNC machining center Makino. The maximum workpiece dimensions are 750 mm in diameter and a height of 950 mm with a weight parts to about 400 kg.
For Machining rotating parts are available CNC turning center OKUMA Genos with clamp the workpiece diameter up to 340 mm. This machine also allows machining in axes C and Y. Also provide surface finish of machined parts, such as nickel, zinc, silver and anodizing.
- Article Count:
- 5
-
Stamping
- Article Count:
- 1
-
Slitting/cutting service
- Article Count:
- 1
-
Feathering
- Article Count:
- 1
-
Shaping
- Article Count:
- 1
-
Coating
- Article Count:
- 1
-
Laser engraving
- Article Count:
- 1
-
Assembly of subassemblies
- Article Count:
- 1
-
Quality
- Article Count:
- 1
