Phenolic paper tubes

Characteristics: The tubes made from cellulose paper as a basis and phenolformaldehyde resin as a binder. This tubes are used like insulating and constructive material for various electrical equipment construction.

The tubes are produced from inside diameter 5,2 mm. The wall thickness is from 2 mm, the tube length is 1050 mm.

Machining: The tubes are machined by cutting, milling, drilling, turning.

Type acc. to EN-60893 Unit PFCP 21PFCP 22
Used name Phenolic paper tube Phenolic paper tube
Type according to DIN 7735 Hp 2065 Hp 2066
Type according to NEMA X    XX
Reinforcement paper paper
Resin phenol phenol
Flexural strength flatwise perpendicular to laminations (at 20°C) MPa 160 150
Tensile strength MPa 155 140
Cohesion of layers MPa 170 200
Dielectric strength perpendicular to layers in oil 90°C kV/mm - 13,3
Breakdown voltage parallel to laminations  kV 29 60
Dissipation factor tg                                       
-    at 50 Hz     -   -
-    at 1 MHz     -   -
Permittivity at 1MHz   - -
Insulation resistance after immersion in water MΩ 2x102 1
Density g/cm3 1,1 - 1,2 1,1 - 1,2
Temperature index (TI)   120 120
Absorbency (for 3 mm thickness) mg/cm3 7,1 7,8
Flammability (category)      -    -
6.12. 2019

SPS IPC Drives 2019

Dear business partners, We would like to thank you for your kind support and especially your visit to our stand at SPS IPC Drives 2019 in Nuremberg.
26.9. 2019

Schönbrunn Zoo in Vienna

On Sunday, September 22, 2019, LABARA s.r.o. for their employees and their families a trip to the zoo in the beautiful gardens of Schönbrunn Palace in Vienna, Austria.
LABARA s.r.o.
Jindřichov 33
595 01 Velká Bíteš
tel.: +420 566 533 128
fax: +420 566 533 111
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.