Phenolic cotton rods

Characteristics: Winded and pressed bars of hardened fabric are made of cotton fabric and phenolic resin.

Applications: They are suitable for the manufacture of various mechanically and electrically loaded components, plain bearings, housings, small-gear gears.

Production dimensions: Textile rods are made from 6 mm in diameter to 200 mm in diameter. Production lengths of rods: 1000 mm.

Type according EN-60893 Unit PFCC42
Used name Phenolic cotton rod
Type according to DIN 7735 Hgw2088
Type according to NEMA  
Reinforcement cotton fabric
Resin phenol
     
MECHANICAL PROPERTIES    
Flexural strength flatwise perpendicular to laminations (at 20°C) MPa 110
Compressive strength perpendicular to laminations MPa 185
     
DIELETRIC PROPERTIES    
Dielectric strength perpendicular to layers in oil 90°C kV 5
Insulation resistance after immersion in water MΩ 40
     
PHYSICAL PROPERTIES    
Density g/cm3 1,2 - 1,4
Temperature index (TI)   120
Water absorption (for thickness 3 mm) mg/cm3 3
Flammability (category)  

Note: The above values in the table are informative only. Technical sheets for individual products on request.

News
17.6. 2022

CWIEME 2024

The leading event for coil winding, transformer, electric motor, generator and e-mobility supply chains, opened its doors on May 14, 2024 at Messe Berlin. Thousands of…
24.5. 2019

INDUSTRY DAYS 2024

Industry Days 2024
Contact
LABARA s.r.o.
Jindřichov 33
595 01 Velká Bíteš
tel.: +420 566 533 128
fax: +420 566 533 111
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Nahoru