Technical laminates – tubes and rods
GLASS EPOXY TUBES G11 – Hgw 2375
Tubes type acc. to DIN 7735: Hgw 2375
The glass epoxy tubes are made from modified glass fabric as a basis and epoxy resin as a binder. This tubes have very good mechanical and electrical properties at high huminidy and mechanical strenght at higher temperatures.
Available dimenisons: The tubes are produced from inside diameter 5,2 mm.
The wall thickness is from 2 mm.
The tube length is 1050 mm.
Machining: The tubes are machined by cutting, turning, drilling and milling
|
Properties |
Unit |
Value
|
|
Density |
g/cm³ |
1,85 |
|
Flexure strenght, min. |
MPa |
280 |
|
Pressure strengtht, min. |
MPa |
150 |
|
Insulation resistance after 96 hours in water 85%, min. |
Ω |
1,0.108 |
|
Breakdown voltage in oil pallarel to layers by 90°C for 20 mm, min. |
kV |
20 |
|
Electrical strenght in oil, pallarel to layers by 90°C, min. |
KV.mm-1 |
10 |