Glastherm
Glastherm - heat insulation systems
High-strength, temperature resistant insulation made from glass fibre reinforced composite materials play a very important role in accurate temperature controls and energy conservation. They are employed wherever thermal separation is required for operational and/or economic reasons between components in installations.
These all offer the following special characteristics:
- high strength characteristics ensure against bending and compression. Continuous long-term use.
- low thermal conductivity
- ourstanding size and dimensional stability
- excellent workability, available in a wide range
- oil and monture resistant
- insulation with excedent dielectric characteristics
We can offer following:
- we have on stock GLASTHERM HT200 – which is most often used in thicknesses 6, 8, 10, 15, 20, 25 mm
1220x2440 mm, GLASTHERM HT220 - thicknesses 10, 15, 20 mm size
1220x2440 mm and GLASTHERM HT250 - thicknesses 8, 10 mm 1040x2000 mm - other thicknesses and types on request
|
Technical data |
Test method |
Unit |
Glastherm HT 200 |
Glastherm HT 220 |
Glastherm HT 250 M |
Glastherm HT 250 HQ |
|
Standard colour |
- |
- |
green, white |
yellow |
grown |
green |
|
Specific gravity |
ISO 1183 |
g/cm3 |
2 |
1,9 |
2 |
2 |
|
Operating temperature1) |
- |
°C |
200 |
220 |
250 |
250 |
|
Compressive strength 23°C |
ISO 604 |
Mpa |
330 |
500 |
600 |
600 |
|
Compressive strength 200°C |
120 |
280 |
450 |
500 |
||
|
Bending strength 23°C |
ISO 178 |
MPa |
210 |
360 |
300 |
600 |
|
Transverse thermal conductivity |
|
W m.k |
0,27 |
0,25 |
0,23 |
0,23 |
|
Water absorption |
ISO 62 |
% |
<0,2 |
<0,2 |
<0,15 |
<0,1 |
|
Coefficient of linear expansion |
Mettler TMA |
10-6 K |
10-15 |
10-20 |
10-20 |
10-20 |
|
Size |
- |
mm |
2440x1220 1830x915 |
2440x1220 |
2000x1040 |
2000x1040 |
|
Thickness |
- |
4 - 50 mm 2) |
||||
|
Thickness tolerances |
- |
mm |
+/- 0,05 |
+/- 0,1 |
||
1) Insulations are subjekt to wear. Service life is dependent of the height and durativ of the temperature, the mechanical stresses and the type of repase agent used.
2) Other thicknesses on request.
Glastherm - photos
